P.S. Free & New NSE8_812 dumps are available on Google Drive shared by PDFDumps: https://drive.google.com/open?id=1XzO67Yap8eaBixI8637lXSS9sV_yPZmv

It is quite clear that let the facts speak for themselves is more convincing than any word, therefore, we have prepared free demo in this website for our customers to have a taste of the NSE8_812 test torrent compiled by our company. You will understand the reason why we are so confident to say that the NSE8_812 Exam Torrent compiled by our company is the top-notch NSE8_812 exam torrent for you to prepare for the exam. You can choose to download our free demo at any time as you like, you are always welcome to have a try, and we trust that our NSE8_812 exam materials will never let you down.

Fortinet NSE8_812 exam is an advanced-level certification exam that validates the knowledge and skills required to design, configure, and manage complex network security infrastructures. It is designed for experienced network security professionals who have a deep understanding of network security concepts and technologies. Passing NSE8_812 Exam demonstrates that you have the expertise to work with Fortinet's advanced security solutions and can effectively manage security operations in complex environments.

>> Latest Real NSE8_812 Exam <<

Free PDF Quiz Latest Fortinet - NSE8_812 - Latest Real Fortinet NSE 8 - Written Exam (NSE8_812) Exam

We all realize that how important an Fortinet Network Security Expert certification is, also understand the importance of having a good knowledge of it. Passing the NSE8_812 exam means you might get the chance of higher salary, greater social state and satisfying promotion chance. Once your professional ability is acknowledged by authority, you master the rapidly developing information technology. With so many advantages, why don’t you choose our reliable NSE8_812 Actual Exam guide, for broader future and better life? Our NSE8_812 exam questions won't let you down.

Fortinet NSE 8 - Written Exam (NSE8_812) Sample Questions (Q33-Q38):

NEW QUESTION # 33
An administrator has configured a FortiGate device to authenticate SSL VPN users using digital certificates. A FortiAuthenticator is the certificate authority (CA) and the Online Certificate Status Protocol (OCSP) server.
Part of the FortiGate configuration is shown below:

Based on this configuration, which two statements are true? (Choose two.)

A. If the OCSP server is unreachable, authentication will succeed if the certificate matches the CA.
B. OCSP checks will always go to the configured FortiAuthenticator
C. OCSP certificate responses are never cached by the FortiGate.
D. The OCSP check of the certificate can be combined with a certificate revocation list.

Answer: A,D

Explanation:
B is correct because the OCSP check of the certificate can be combined with a certificate revocation list (CRL). This means that the FortiGate will check the OCSP server to see if the certificate has been revoked, and it will also check the CRL to see if the certificate has been revoked.
D is correct because if the OCSP server is unreachable, authentication will succeed if the certificate matches the CA. This is because the FortiGate will fall back to using the CRL if the OCSP server is unreachable.
The other options are incorrect. Option A is incorrect because OCSP checks can go to other OCSP servers, not just the FortiAuthenticator. Option C is incorrect because OCSP certificate responses can be cached by the FortiGate.
References:
Configuring SSL VPN authentication using digital certificates | FortiGate / FortiOS 7.2.0 - Fortinet Document Library Online Certificate Status Protocol (OCSP) | FortiGate / FortiOS 7.2.0 - Fortinet Document Library Certificate Revocation Lists (CRLs) | FortiGate / FortiOS 7.2.0 - Fortinet Document Library

NEW QUESTION # 34
Refer to the exhibit.

You are deploying a FortiGate 6000F. The device should be directly connected to a switch. In the future, a new hardware module providing higher speed will be installed in the switch, and the connection to the FortiGate must be moved to this higher-speed port.
You must ensure that the initial FortiGate interface connected to the switch does not affect any other port when the new module is installed and the new port speed is defined.
How should the initial connection be made?

A. Connect the switch on any interface between ports 25 to 28
B. Connect the switch on any interface between ports 1 to 4
C. Connect the switch on any interface between ports 21 to 24
D. Connect the switch on any interface between ports 5 to 8.

Answer: B

Explanation:
The FortiGate 6000F has 24 1/10/25-Gbps SFP28 data network interfaces (1 to 24). These interfaces are divided into the following interface groups: 1 to 4, 5 to 8, 9 to 12, 13 to 16, 17 to 20, and 21 to 24. The ports 25 to 28 are 40/100-Gbps QSFP28 data network interfaces.
The initial connection should be made to any interface between ports 1 to 4. This is because the ports 21 to 24 are part of the same interface group, and changing the speed of one of these ports will affect the speeds of all of the ports in the group. The ports 5 to 8 are also part of the same interface group, so they should not be used for the initial connection.
The new hardware module that will be installed in the switch will provide higher speed ports. When this module is installed, the speed of the ports 21 to 24 will be increased. However, this will not affect the ports 1 to 4, because they are not part of the same interface group.
Therefore, the initial connection should be made to any interface between ports 1 to 4, in order to ensure that the FortiGate interface connected to the switch does not affect any other port when the new module is installed and the new port speed is defined.
Reference:
FortiGate 6000F Front Panel Interfaces: https://docs.fortinet.com/document/fortigate-6000/hardware/fortigate-6000f-system-guide/827055/front-panel-interfaces

NEW QUESTION # 35
Refer to the exhibits.

The exhibits show the configuration and debug output from a FortiGate Public SDN Connector.
What is a possible reason for this dynamic address object to be empty?

A. The App registration does not have a role with necessary read permissions on the resource group.
B. The resource group NSE8-Lab does not exist.
C. The Client secret is incorrect.
D. The Application ID is incorrect.

Answer: A

NEW QUESTION # 36
Refer to the exhibit.

You are operating an internal network with multiple OSPF routers on the same LAN segment. FGT_3 needs to be added to the OSPF network and has the configuration shown in the exhibit. FGT_3 is not establishing any OSPF connection.
What needs to be changed to the configuration to make sure FGT_3 will establish OSPF neighbors without affecting the DR/BDR election?

A.
B.
C.
D.

Answer: B

Explanation:
The OSPF configuration shown in the exhibit is using the default priority value of 1 for the interface port1. This means that FGT_3 will participate in the DR/BDR election process with the other OSPF routers on the same LAN segment. However, this is not desirable because FGT_3 is a new device that needs to be added to the OSPF network without affecting the existing DR/BDR election. Therefore, to make sure FGT_3 will establish OSPF neighbors without affecting the DR/BDR election, the priority value of the interface port1 should be changed to 0. This will prevent FGT_3 from becoming a DR or BDR and allow it to form OSPF adjacencies with the current DR and BDR. Option B shows the correct configuration that changes the priority value to 0. Option A is incorrect because it does not change the priority value. Option C is incorrect because it changes the network type to point-to-point, which is not suitable for a LAN segment with multiple OSPF routers. Option D is incorrect because it changes the area ID to 0.0.0.1, which does not match the area ID of the other OSPF routers on the same LAN segment. Reference: https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/358640/basic-ospf-example

NEW QUESTION # 37
You must configure an environment with dual-homed servers connected to a pair of FortiSwitch units using an MCLAG.
Multicast traffic is expected in this environment, and you should ensure unnecessary traffic is pruned from links that do not have a multicast listener.
In which two ways must you configure the igmps-f lood-traffic and igmps-flood-report settings? (Choose two.)

A. enable on the ISL and FortiLink trunks
B. disable on ICL trunks
C. enable on ICL trunks
D. disable on the ISL and FortiLink trunks

Answer: C,D

Explanation:
https://docs.fortinet.com/document/fortiswitch/7.0.8/devices-managed-by-fortios/801194/deploying-mclag- topologies

NEW QUESTION # 38
......

If you have been very panic sitting in the examination room, our NSE8_812 actual exam allows you to pass the exam more calmly and calmly. After you use our products, our study materials will provide you with a real test environment before the NSE8_812 exam. After the simulation, you will have a clearer understanding of the exam environment, examination process, and exam outline. Our NSE8_812 Study Materials will really be your friend and give you the help you need most. Our NSE8_812 exam materials understand you and hope to accompany you on an unforgettable journey.

Training NSE8_812 Solutions: https://www.pdfdumps.com/NSE8_812-valid-exam.html

What's more, part of that PDFDumps NSE8_812 dumps now are free: https://drive.google.com/open?id=1XzO67Yap8eaBixI8637lXSS9sV_yPZmv